STEEL

WORKSHOP PARTITIONS

STEEL RANGE

ADVANTAGES

Monobloc panel: solid, mesh or glazed factory panel
Modules of 1000 and 1200 allowing positioning of preferred door
Assembled by wedged keying system
Stabilising base dowelled to the floor
Easy installation
Delivered as kit or installed by us
Available colours: Panel and door: RAL 9016 Upright and stiffener: as per SIC colour chart

DESCRIPTION

Partition

Relocatable single-wall monobloc panel
Folded profile uprights 10/10th
Lacquered metal plate panel, 8/10th
Choice of top section:

Mesh
Single glazing, 4 mm
Particle board panel, thickness 16 mm, white melamine facing on both sides extending from lower panel
Lacquered metal plate extending from lower panel

Door

Single-wall door panel:

Single or double swing door comprising:

Panel with overpanel,
Reversible frame (opening from inside or outside) epoxy lacquer with lip seal,
Door with single-glazed oculus
Recessed safety lock with barrel for European key 1 and double lever-handle on rectangular plates. (For double door: rectangular plates on moving leaf and bayonet bolts on semi-fixed leaf).

Clearance:

Single: width 0.80 m - height 2.03 m
Double: width 1.78 m, height 2.40 m.

Single sliding door comprising:

Door opener / closer,
Transom with open profile rail for sliding a door of identical design to the panel.
The unit is equipped with:

2 roller carriages
One recessed lock with barrel for European key 1,
A double lever-handle on rectangular plates,
An inside and outside pulling handle.

Clearance:
Width: 1.75 m,
Height: 2.50 m or 3 m depending on partition.

Assembly, securing, stiffener

Panels assembled by screws
Secured to floor by dowelling base:
For height adjustment of panels
and compensation for floor unevenness.
Stiffener secured to top transom of panels For alignment of panels.

Dimensions

Height: 2.50 or 3.00 m
Width: 0.50 - 1 or 1.00 m

Accessories

Angle post
Wall connection
Stiffener, length: 3,00 m
Wicket door